TruPunch 5000 NEW

TruPunch 5000 NEW

분 류	펀칭기
품 명	TruPunch 5000
적용 분야	펀칭과 포밍

TruPunch 5000 의 고가속도는 엄청난 생산성을 가능하게 합니다. 이는 부분적으로 구성요소의 경량화와 새롭게 설계되고 적용된 수냉식 드라이브에 의한 것입니다. Y 축은 갠트리(gantry) 드라이브, 즉 물리적인 연결 없이 제어로 동기화되는 2개의 독립적인 드라이브가 특징입니다. 이 컨셉으로 심지어 Y 축에도 고가속도를 가능하게 합니다.:

• X 축 2g 이상 가속도
• Y 축 1g 이상 가속도

TruPunch 5000 NEW 펀칭 헤드

Forming at close to punching speed
The TruPunch 5000 punches at a hit rate of up to 1,200 strokes/min or up to 2,800 strokes/min. when marking. At the same time, the acceleration rate and the speed of C axis rotation have increased significantly; this, in turn, enables contouring and tapping at high speed.

• Hit rate: 1200 strokes per minute, 2800 when marking
• Rotation: The C axis rotates at 350 RPM
• High-speed forming: Variable forming height makes for short stroke lengths, forming almost at punching speed

Innovative tool technology
The punch, stripper and die are monitored by sensors during tool change, thereby ensuring process reliability. On the TruPunch 5000, it is possible, for the first time, to use 5 and 10 station MultiTools suitable for a sheet thickness up to 4 mm.

• TRUMPF MultiBend: Produce right-angled bends on outer and inner edges up to 25 mm
• TRUMPF MultiShear: By using this tool, it is virtually impossible to differentiate between a punched and a lasered edge
• Roller technology: Enables roller shearing, roller beading, roller offsetting and roller pinching
• Fast tool change: Less than 3 seconds for single tools and a mere 0.7 seconds within a MultiTool
  In addition to this, the optional brush tables help to meet the increasing demands for low-scratch parts fabrication.

Online Help - E-shop for ordering spare parts
The open control system of the machine guarantees easy operation. The Online Help answers questions as they arise, the diagnostic concept registers faults and displays possible solutions in plain language. Teleservice via the built-in modem is a matter of course.

For the customer's convenience, an E-Shop is available for spare parts orders. The parts can be ordered both from the machine control or from a PC with Internet connection.

The right automation for all purposes

Automation - tailored for high productivity
Thanks to its modular automation concept, the TruPunch 5000 can be expanded into a system for fully automated operation, with every finished part being removed automatically.

The many sensor monitoring measures provided ensure that process reliability stays in the foreground.

Technical Data

	TruPunch 5000 NEW
Working area	2550 mm x 1280 mm	3070 mm x 1660 mm
Max. sheet thickness	8 mm	8 mm
Max. punching force	220 kN	220 kN
Max. stroke rate punching (E = 1 mm)	1200 1/min	1000 1/min
Max. stroke rate marking	approx. 2800 1/min	approx. 2800 1/min
Tools, linear magazine	18 tools with 3 clamps	21 tools with 4 clamps
Programmable part chute Max. part size	500 mm x 500 mm	500 mm x 500 mm
Space requirements	approx. 6760 mm x 6100 mm	approx. 7600 mm x 7000 mm